How can I handle command-line arguments (options) to my script easily?

Well, that depends a great deal on what you want to do with them. There are several approaches, each with its strengths and weaknesses.

Manual loop

This approach handles any arbitrary set of options, because you're writing the parser yourself. For 90% of programs, it may suffice.

Here's an example that will handle a combination of short (-v, -h) and long (--verbose, --help) options; and also style --verbose=LEVEL.

   1 #!/bin/sh
   2 
   3 Main ()
   4 {
   5     help=""         # Reset all option variables that might be set later
   6     verbose=""
   7     verbose_level=""
   8 
   9     while :
  10     do
  11         case "$1" in
  12             -h | --help)
  13                 help="help"
  14                 shift       # Remove from argument list
  15                 #  Now, e.g. call Help() function
  16                 ;;
  17             --verbose=*)
  18                 # If you want to support --option=VALUE style
  19                 verbose="verbose"
  20                 verbose_level=${1#*=}   # Delete everything up till "="
  21                 shift
  22                 ;;
  23             -v | --verbose)
  24                 verbose="verbose"
  25                 verbose_level=1
  26                 shift
  27 
  28                 # Support "--verbose LEVEL" by reading next argument.
  29 
  30                 case "$1" in
  31                     [0-9]) verbose_level=$1
  32                            shift
  33                            ;;
  34                 esac
  35                 ;;
  36             --) # End of all options
  37                 shift
  38                 break
  39                 ;;
  40             -*)
  41                 echo "WARN: Unknown option: $1" >&2
  42                 shift
  43                 ;;
  44             *)  # no more options. Stop while loop
  45                 break
  46                 ;;
  47         esac
  48     done
  49 
  50     # Suppose, some options are required. Check that we got them.
  51     # Make --verbose a required option:
  52 
  53     if [ ! "$verbose" ]; then
  54         echo "ERROR: option --verbose not given. See --help" >&2
  55         return 1
  56     fi
  57 
  58     # <Rest of the program here>
  59 }
  60 
  61 Main "$@"
  62 
  63 # End of file

What is not possible to do with pure shell approach, is to try to parse separate options concatenated together. Like like -xvf which would understood as -x -v -f. This could be possible with lot of effort, but in practice it wouldn't be worth it.

You may be interested in knowing that some Bash programmers like to write this at the beginning of their scripts to guard against unused variables:

    set -u     # or, set -o nounset

getopts

Never use getopt(1). getopt cannot handle empty arguments strings, or arguments with embedded whitespace. Please forget that it ever existed.

The POSIX shell (and others) offer getopts which is safe to use instead. Here is a simplistic getopts example:

   1 #!/bin/sh
   2 
   3 # A POSIX variable
   4 OPTIND=1         # Reset in case getopts has been used previously in the shell.
   5 
   6 while getopts "h?vf:" opt; do
   7     case "$opt" in
   8         h|\?)
   9             show_help
  10             exit 0
  11             ;;
  12         v)  verbose=1
  13             ;;
  14         f)  output_file=$OPTARG
  15             ;;
  16     esac
  17 done
  18 
  19 shift $((OPTIND-1))
  20 
  21 [ "$1" = "--" ] && shift
  22 
  23 echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"
  24 
  25 # End of file

The disadvantage of getopts is that it can only handle short options (-h) without trickery. It handles -vf filename in the expected Unix way, automatically. getopts is a good candidate because it is portable and e.g. also works in dash.

There is a getopts tutorial which explains what all of the syntax and variables mean. In bash, there is also help getopts, which might be informative.

There is also still the disadvantage that options are coded in at least 2, probably 3 places - in the call to getopts, in the case statement that processes them and presumably in the help message that you are going to get around to writing one of these days. This is a classic opportunity for errors to creep in as the code is written and maintained - often not discovered till much, much later. This can be avoided by using callback functions, but this approach kind of defeats the purpose of using getopts at all.

Here is an example which parses long options with getopts. The basic idea is quite simple: just put "-:" into the optstring. This trick requires a shell which permits the option-argument (i.e. the filename in "-f filename") to be concatenated to the option (as in "-ffilename"). The POSIX standard says there must be a space between them; bash and dash permit the "-ffilename" variant, but one should not rely on this leniency if attempting to write a portable script.

   1 #!/bin/bash
   2 # Uses bash extensions.  Not portable as written.
   3 
   4 optspec=":h-:"
   5 
   6 while getopts "$optspec" optchar
   7 do
   8     case "${optchar}" in
   9         -)
  10             case "${OPTARG}" in
  11               loglevel)
  12                   eval val="\$${OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
  13                   echo "Parsing option: '--${OPTARG}', value: '${val}'" >&2
  14                   ;;
  15               loglevel=*)
  16                   val=${OPTARG#*=}
  17                   opt=${OPTARG%=$val}
  18                   echo "Parsing option: '--${opt}', value: '${val}'" >&2
  19                   ;;
  20             esac
  21             ;;
  22         h)
  23             echo "usage: $0 [--loglevel[=]<value>]" >&2
  24             exit 2
  25             ;;
  26     esac
  27 done

Silly repeated brute-force scanning

Another approach is to check options with if statements "on demand". A function like this one may be useful:

   1 #!/bin/bash
   2 
   3 HaveOpt ()
   4 {
   5     local needle=$1
   6     shift
   7 
   8     while [[ $1 == -* ]]
   9     do
  10         # By convention, "--" means end of options.
  11         case "$1" in
  12             --)      return 1 ;;
  13             $needle) return 0 ;;
  14         esac
  15 
  16         shift
  17     done
  18 
  19     return 1
  20 }
  21 
  22 HaveOpt --quick "$@" && echo "Option quick is set"
  23 
  24 # End of file

and it will work if script is run as:

but will stop on first argument with no "-" in front (or on --):

Of course, this approach (iterating over the argument list every time you want to check for one) is far less efficient than just iterating once and setting flag variables.

It also spreads the options throughout the program. The literal option --quick may appear a hundred lines down inside the main body of the program, nowhere near any other option name. This is a nightmare for maintenance.

Complex nonstandard add-on utilities

bhepple suggests the use of process-getopt (GPL licensed) and offers this example code:

PROG=$(basename $0)
VERSION='1.2'
USAGE="A tiny example using process-getopt(1)"

# call process-getopt functions to define some options:
source process-getopt

SLOT=""
SLOT_func()   { [ "${1:-""}" ] && SLOT="yes"; }      # callback for SLOT option
add_opt SLOT "boolean option" s "" slot

TOKEN=""
TOKEN_func()  { [ "${1:-""}" ] && TOKEN="$2"; }      # callback for TOKEN option
add_opt TOKEN "this option takes a value" t n token number

add_std_opts     # define the standard options --help etc:

TEMP=$(call_getopt "$@") || exit 1
eval set -- "$TEMP" # just as with getopt(1)

# remove the options from the command line
process_opts "$@" || shift "$?"

echo "SLOT=$SLOT"
echo "TOKEN=$TOKEN"
echo "args=$@"

Here, all information about each option is defined in one place making for much easier authoring and maintenance. A lot of the dirty work is handled automatically and standards are obeyed as in getopt(1) - because it calls getopt for you.

It's written and tested on Linux where getopt(1) supports long options. For portability, it tests the local getopt(1) at runtime and if it finds an non-GNU one (ie one that does not return 4 for getopt --test) it only processes short options. It does not use the bash builtin getopts(1) command. -bhepple


CategoryShell