Differences between revisions 11 and 30 (spanning 19 versions)
Revision 11 as of 2009-12-07 20:04:44
Size: 5416
Editor: GreyCat
Comment: tested process-getopt
Revision 30 as of 2011-10-07 18:28:14
Size: 9249
Editor: dslb-092-076-251-070
Comment: Example for parsing long options with getopts
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
Well, that depends a great deal on what you want to do with them. Here's a general template that might help for the simple cases: Well, that depends a great deal on what you want to do with them. There are several approaches, each with its strengths and weaknesses.

=== Manual loop ===
This approach handles any arbitrary set of options, because you're writing the parser yourself. For 90% of programs, this turns out to be the simplest and most direct approach, since very few scripts need complicated option processing.

Here's an example that will handle a combination of short (`-h`) and long (`--help`) options.
Line 14: Line 19:
            printf "%s\n" "-f requires an argument"             echo "-f requires an argument" 1>&2
Line 18: Line 23:
      -*) echo "invalid option: $1"; show_help; exit 1;;       -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
Line 34: Line 39:
            printf "%s\n" "-f requires an argument"             echo "-f requires an argument" 1>&2
Line 38: Line 43:
      -*) echo "invalid option: $1"; show_help; exit 1;;       -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
Line 44: Line 49:
For more complex/generalized cases, or if you want things like "-xvf" to be handled as three separate flags, or if you want to handle [[http://www.gnu.org/software/libtool/manual/libc/Argument-Syntax.html|GNU-style long options]], you need a different approach. Some Bash programmers write this at the beginning of their scripts:
{{{
    set -u
    # or, set -o nounset
}}}
This way Bash stops if it's forced to work with the value of an unset variable. If you use `set -o nounset`, the Bash version of the "manual loop" shown above may break, if there are no additional non-option arguments. It can be fixed thus:

{{{
# Bash (with set -u)
while [[ $1 == -* ]]; do
    case "$1" in
      -h|--help|-\?) show_help; exit 0;;
      -v|--verbose) verbose=1; shift;;
      -f) if (($# > 1)); then
            output_file=$2; shift 2
          else
            echo "-f requires an argument" 1>&2
            exit 1
          fi ;;
      --) shift; break;;
      -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
    esac
    if ! test "${1+defined}"; then
        break
    fi
done
}}}

What these examples ''do not'' handle are:
 * You want things like `-xvf` to be handled as three separate flags (equivalent to `-x -v -f`).
 * You want to parse arguments out of `--file=bar`.

It's certainly possible to do those things by changing the code, but at least in the first case, there's another approach that handles that automatically.

=== getopts ===
Line 48: Line 87:
The POSIX shell (and others) offer `getopts` which is safe to use. Here is a simplistic `getopts` example: The POSIX shell (and others) offer `getopts` which is safe to use instead. Here is a simplistic `getopts` example:
Line 52: Line 91:
x=1 # Avoids an error if we get no options at all.
while getopts "abcf:g:h:" opt; do
OPTIND=1 # Reset in case getopts has been used previously in the shell.
while getopts "h?vf:" opt; do
Line 55: Line 94:
    a) echo "You said a";;
    b) echo "You said b";;
    c) echo "You said c";;
    f) echo "You said f, with argument $OPTARG";;
    g) echo "You said g, with argument $OPTARG";;
    h) echo "You said h, with argument $OPTARG";;
    h|\?) show_help; exit 0;;
    v) verbose=1;;
    f) output_file=$OPTARG;;
Line 62: Line 98:
  x=$OPTIND
done
shift $(($x-1))
echo "Left overs: $@"
}}}

There is still the disadvantage that options are coded in at least 2, probably 3 places - in the call to `getopts`, in the case statement that processes them and presumably in the help message that you are going to get around to writing one of these days. This is a classic opportunity for errors to creep in as the code is written and maintained - often not discovered till much, much later.
done
shift $((OPTIND-1))
if [ "$1" = -- ]; then shift; fi
echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"
}}}

The disadvantage of `getopts` is that it can only handle short options (`-h`) natively. It handles `-vf filename` in the expected Unix way, automatically. Long option support is limited, see the example below. `getopts` is a good candidate because it is portable and e.g. also works in the Dash Alquimist shell ("dash").

There is a [[http://wiki.bash-hackers.org/howto/getopts_tutorial|getopts tutorial]] which explains what all of the syntax and variables mean. In bash, there is also `help getopts`, which might be informative.

There is also still the disadvantage that options are coded in at least 2, probably 3 places - in the call to `getopts`, in the case statement that processes them and presumably in the help message that you are going to get around to writing one of these days. This is a classic opportunity for errors to creep in as the code is written and maintained - often not discovered till much, much later. This can be avoided by using callback functions, but this approach kind of defeats the purpose of using getopts at all.

Here is an example how to parse long options with getopts. The basic idea is quite simple, just put "-:" into the optstring:

{{{
#!/bin/bash
optspec=":hv-:"
while getopts "$optspec" optchar; do
  case "${optchar}" in
    -)
      case "${OPTARG}" in
        loglevel)
          val="${!OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
          echo "Parsing option: '--${OPTARG}', value: '${val}'" >&2;
          ;;
        loglevel=*)
          val=${OPTARG#*=}
          opt=${OPTARG%=$val}
          echo "Parsing option: '--${opt}', value: '${val}'" >&2
          ;;
        *)
          if [ "$OPTERR" = 1 ] && [ "${optspec:0:1}" != ":" ]; then
            echo "Unknown option --${OPTARG}" >&2
          fi
          ;;
      esac;;
    v)
      echo "Parsing option: '-${optchar}'" >&2
      ;;
    *)
      if [ "$OPTERR" != 1 ] || [ "${optspec:0:1}" = ":" ]; then
        echo "Non-option argument: '-${OPTARG}'" >&2
      fi
      ;;
    h)
      echo "usage: $0 [-v] [--loglevel[=]<value>]" >&2
      exit 2
      ;;
  esac
done
}}}

Note the difference here between bash an dash:

{{{
  getopts -- "-:" optchar ## without the option terminator "-- " bash complains about "-:"
  getopts "-:" optchar ## this works in the Debian Almquist shell ("dash")
}}}

=== Silly repeated brute-force scanning ===
Line 79: Line 168:
      --) return 1; # by convention, -- is end of options       --) return 1;; # by convention, -- is end of options
Line 88: Line 177:
Line 92: Line 182:
Line 96: Line 187:
Of course, this approach (iterating over the argument list every time you want to check for one) is far less efficient than just iterating once and setting flag variables. But it does offer a consolidation of the option-handling code into a single place (or two places if you count the help message).
Of course, this approach (iterating over the argument list every time you want to check for one) is far less efficient than just iterating once and setting flag variables.

It also spreads the options throughout the program. The literal option `--quick` may appear a hundred lines down inside the main body of the program, nowhere near any other option name. This is a nightmare for maintenance.

=== Complex nonstandard add-on utilities ===
Line 106: Line 202:
source /usr/bin/process-getopt source process-getopt
Line 136: Line 232:

It's written and tested on Linux where getopt(1) supports long options. For portability, it tests the local getopt(1) at runtime and if it finds an non-GNU one (ie one that does not return 4 for {{{getopt --test}}}) it only processes short options. It does not use the bash builtin getopts(1) command. -[[http://bhepple.freeshell.org/oddmuse/wiki.cgi/process-getopt|bhepple]]

----
CategoryShell

How can I handle command-line arguments (options) to my script easily?

Well, that depends a great deal on what you want to do with them. There are several approaches, each with its strengths and weaknesses.

Manual loop

This approach handles any arbitrary set of options, because you're writing the parser yourself. For 90% of programs, this turns out to be the simplest and most direct approach, since very few scripts need complicated option processing.

Here's an example that will handle a combination of short (-h) and long (--help) options.

# Bash
while [[ $1 == -* ]]; do
    case "$1" in
      -h|--help|-\?) show_help; exit 0;;
      -v|--verbose) verbose=1; shift;;
      -f) if (($# > 1)); then
            output_file=$2; shift 2
          else 
            echo "-f requires an argument" 1>&2
            exit 1
          fi ;;
      --) shift; break;;
      -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
    esac
done

Now all of the remaining arguments are the filenames which followed the optional switches. You can process those with for i or "$@".

A POSIX version of that same code:

# POSIX
while true; do
    case "$1" in
      -h|--help|-\?) show_help; exit 0;;
      -v|--verbose) verbose=1; shift;;
      -f) if [ $# -gt 1 ]; then
            output_file=$2; shift 2
          else 
            echo "-f requires an argument" 1>&2
            exit 1
          fi ;;
      --) shift; break;;
      -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
      *)  break;;
    esac
done

Some Bash programmers write this at the beginning of their scripts:

    set -u
    # or, set -o nounset

This way Bash stops if it's forced to work with the value of an unset variable. If you use set -o nounset, the Bash version of the "manual loop" shown above may break, if there are no additional non-option arguments. It can be fixed thus:

# Bash (with set -u)
while [[ $1 == -* ]]; do
    case "$1" in
      -h|--help|-\?) show_help; exit 0;;
      -v|--verbose) verbose=1; shift;;
      -f) if (($# > 1)); then
            output_file=$2; shift 2
          else 
            echo "-f requires an argument" 1>&2
            exit 1
          fi ;;
      --) shift; break;;
      -*) echo "invalid option: $1" 1>&2; show_help; exit 1;;
    esac
    if ! test "${1+defined}"; then
        break
    fi
done

What these examples do not handle are:

  • You want things like -xvf to be handled as three separate flags (equivalent to -x -v -f).

  • You want to parse arguments out of --file=bar.

It's certainly possible to do those things by changing the code, but at least in the first case, there's another approach that handles that automatically.

getopts

Never use getopt(1). getopt cannot handle empty arguments strings, or arguments with embedded whitespace. Please forget that it ever existed.

The POSIX shell (and others) offer getopts which is safe to use instead. Here is a simplistic getopts example:

# POSIX
OPTIND=1         # Reset in case getopts has been used previously in the shell.
while getopts "h?vf:" opt; do
  case "$opt" in
    h|\?) show_help; exit 0;;
    v) verbose=1;;
    f) output_file=$OPTARG;;
  esac
done
shift $((OPTIND-1))
if [ "$1" = -- ]; then shift; fi
echo "verbose=$verbose, output_file='$output_file', Leftovers: $@"

The disadvantage of getopts is that it can only handle short options (-h) natively. It handles -vf filename in the expected Unix way, automatically. Long option support is limited, see the example below. getopts is a good candidate because it is portable and e.g. also works in the Dash Alquimist shell ("dash").

There is a getopts tutorial which explains what all of the syntax and variables mean. In bash, there is also help getopts, which might be informative.

There is also still the disadvantage that options are coded in at least 2, probably 3 places - in the call to getopts, in the case statement that processes them and presumably in the help message that you are going to get around to writing one of these days. This is a classic opportunity for errors to creep in as the code is written and maintained - often not discovered till much, much later. This can be avoided by using callback functions, but this approach kind of defeats the purpose of using getopts at all.

Here is an example how to parse long options with getopts. The basic idea is quite simple, just put "-:" into the optstring:

optspec=":hv-:"
while getopts "$optspec" optchar; do
  case "${optchar}" in
    -)
      case "${OPTARG}" in
        loglevel)
          val="${!OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
          echo "Parsing option: '--${OPTARG}', value: '${val}'" >&2;
          ;;
        loglevel=*)
          val=${OPTARG#*=}
          opt=${OPTARG%=$val}
          echo "Parsing option: '--${opt}', value: '${val}'" >&2
          ;;
        *)
          if [ "$OPTERR" = 1 ] && [ "${optspec:0:1}" != ":" ]; then
            echo "Unknown option --${OPTARG}" >&2
          fi
          ;;
      esac;;
    v)
      echo "Parsing option: '-${optchar}'" >&2
      ;;
    *)
      if [ "$OPTERR" != 1 ] || [ "${optspec:0:1}" = ":" ]; then
        echo "Non-option argument: '-${OPTARG}'" >&2
      fi
      ;;
    h)
      echo "usage: $0 [-v] [--loglevel[=]<value>]" >&2
      exit 2
      ;;
  esac
done

Note the difference here between bash an dash:

  getopts -- "-:" optchar ## without the option terminator "-- " bash complains about "-:"
  getopts "-:" optchar    ## this works in the Debian Almquist shell ("dash")

Silly repeated brute-force scanning

Another approach is to check options with if statements "on demand". A function like this one may be useful:

# Bash
HaveOpt() {
  local needle=$1
  shift
  while [[ $1 == -* ]]; do
    case "$1" in
      --) return 1;; # by convention, -- is end of options
      $needle) return 0;;
    esac
    shift
  done
  return 1
}
if HaveOpt --quick "$@"; then echo "Option quick is set"; fi

and it will work if script is run as:

  • YES: ./script --quick
  • YES: ./script -other --quick

but will stop on first argument with no "-" in front (or on --):

  • NO: ./script -bar foo --quick
  • NO: ./script -bar -- --quick

Of course, this approach (iterating over the argument list every time you want to check for one) is far less efficient than just iterating once and setting flag variables.

It also spreads the options throughout the program. The literal option --quick may appear a hundred lines down inside the main body of the program, nowhere near any other option name. This is a nightmare for maintenance.

Complex nonstandard add-on utilities

bhepple suggests the use of process-getopt (GPL licensed) and offers this example code:

PROG=$(basename $0)
VERSION='1.2'
USAGE="A tiny example using process-getopt(1)"

# call process-getopt functions to define some options:
source process-getopt

SLOT=""
SLOT_func()   { [ "${1:-""}" ] && SLOT="yes"; }      # callback for SLOT option
add_opt SLOT "boolean option" s "" slot

TOKEN=""
TOKEN_func()  { [ "${1:-""}" ] && TOKEN="$2"; }      # callback for TOKEN option
add_opt TOKEN "this option takes a value" t n token number

add_std_opts     # define the standard options --help etc:

TEMP=$(call_getopt "$@") || exit 1
eval set -- "$TEMP" # just as with getopt(1)

# remove the options from the command line
process_opts "$@" || shift "$?"

echo "SLOT=$SLOT"
echo "TOKEN=$TOKEN"
echo "args=$@"

Here, all information about each option is defined in one place making for much easier authoring and maintenance. A lot of the dirty work is handled automatically and standards are obeyed as in getopt(1) - because it calls getopt for you.

  • Actually, what the author forgot to say was that it's actually using getopts semantics, rather than getopt. I ran this test:

     wooledg@wooledg:~/process-getopt-1.6$ set -- one 'rm -rf /' 'foo;bar' "'"
     wooledg@wooledg:~/process-getopt-1.6$ call_getopt "$@"
      -- 'rm -rf /' 'foo;bar' ''\'''
  • It appears to be intelligent enough to handle null options, whitespace-containing options, and single-quote-containing options in a manner that makes the eval not blow up in your face. But this is not an endorsement of the process-getopt software overall; I don't know it well enough. -GreyCat

It's written and tested on Linux where getopt(1) supports long options. For portability, it tests the local getopt(1) at runtime and if it finds an non-GNU one (ie one that does not return 4 for getopt --test) it only processes short options. It does not use the bash builtin getopts(1) command. -bhepple


CategoryShell

BashFAQ/035 (last edited 2024-02-26 07:51:38 by larryv)