Diff for "BashFAQ/006"

How can I use variable variables (indirect variables, pointers, references) or associative arrays?

This is a complex page, because it's a complex topic. It's been divided into roughly three parts: associative arrays, evaluating indirect variables, and assigning indirect variables. There are discussions of programming issues and concepts scattered throughout.

Associative Arrays

We introduce associative arrays first, because in the majority of cases where people are trying to use indirect variable assignments/evaluations, they ought to be using associative arrays instead. For instance, we frequently see people asking how they can have a bunch of related variables like IPaddr_hostname1, IPaddr_hostname2 and so on. A more appropriate way to store this data would be in an associative array named IPaddr which is indexed by the hostname.

To map from one string to another, you need arrays indexed by a string instead of a number. These exists in AWK as "associative arrays", in Perl as "hashes", and in Tcl simply as "arrays". They also exist in ksh93, where you'd use them like this:

•  # ksh93
   typeset -A homedir             # Declare ksh93 associative array
   homedir[jim]=/home/jim
   homedir[silvia]=/home/silvia
   homedir[alex]=/home/alex
  
   for user in "${!homedir[@]}"   # Enumerate all indices (user names)
   do
       echo "Home directory of user $user is ${homedir[$user]}"
   done

BASH supports them from version 4 and up:

•  # Bash 4 and up
   declare -A homedir
   homedir[jim]=/home/jim
   # or
   homedir=( [jim]=/home/jim
             [silvia]=/home/silvia
             [alex]=/home/alex )
   ...

Prior to Bash 4 or if you can't use ksh93, your options are limited. Either move to another interpreter (awk, perl, python, ruby, tcl, ...) or re-evaluate your problem to simplify it.

There are certain tasks for which associative arrays are a powerful and completely appropriate tool. There are others for which they are overkill, or simply unsuitable.

Suppose we have several subservient hosts with slightly different configuration, and that we want to ssh to each one and run slightly different commands. One way we could set it up would be to hard-code a bunch of ssh commands in per-hostname functions in a single script and just run them in series or in parallel. (Don't reject this out of hand! Simple is good.) Another way would be to store each group of commands as an element of an associative array keyed by the hostname:

•  source "$conf"
   for host in "${!commands[@]}"; do
       ssh "$host" "${commands[$host]}"
   done
  
   # Where "$conf" is a file like this:
   declare -A commands
   commands=( [host1]="mvn clean install && cd webapp && mvn jetty:run"
              [host2]="..."
   )

This is the kind of approach we'd expect in a high-level language, where we can store hierarchical information in advanced data structures. The difficulty here is that we really want each element of the associative array to be a list or another array of command strings. But the shell simply doesn't permit that kind of data structure.

So, often it pays to step back and think in terms of shells rather than other programming languages. Aren't we just running a script on a remote host? Then why don't we just store the configuration sets as scripts? Then it's simple:

•  # A series of conf files named for the hosts we need to run our commands on:
   for conf in /etc/myapp/*; do
       host=${conf##*/}
       ssh "$host" bash < "$conf"
   done
  
   # /etc/myapp/hostname is just a script:
   mvn clean install &&
   cd webapp &&
   mvn jetty:run

Now we've removed the need for associative arrays, and also the need to maintain a bunch of extremely horrible quoting issues. It is also easy to parallelize using GNU Parallel:

•  parallel ssh {/} bash "<" {} ::: /etc/myapp/*

Associative array hacks in older shells

Before you think of using eval to mimic associative arrays in an older shell (probably by creating a set of variable names like homedir_alex), try to think of a simpler or completely different approach that you could use instead. If this hack still seems to be the best thing to do, consider the following disadvantages:

1. It's really hard to read, to keep track of, and to maintain.

2. The variable names must match the RegularExpression ^[a-zA-Z_][a-zA-Z_0-9]* -- i.e., a variable name cannot contain arbitrary characters but only letters, digits, and underscores. We cannot have a variable's name contain Unix usernames, for instance -- consider a user named hong-hu. A dash '-' cannot be part of a variable name, so the entire attempt to make a variable named homedir_hong-hu is doomed from the start.

3. Quoting is hard to get right. If a content string (not a variable name) can contain whitespace characters and quotes, it's hard to quote it right to preserve it through both shell parsings. And that's just for constants, known at the time you write the program. (Bash's printf %q helps, but nothing analogous is available in POSIX shells.)

4. If the program handles unsanitized user input, it can be VERY dangerous!

Read BashGuide/Arrays or BashFAQ/005 for a more in-depth description and examples of how to use arrays in Bash.

If you need an associative array but your shell doesn't support them, please consider using AWK instead.

Indirection

Think before using indirection

Putting variable names or any other bash syntax inside parameters is generally a bad idea. It violates the separation between code and data, and as such puts you on a slippery slope toward bugs, security issues, etc. Even when you know you "got it right", because you "know and understand exactly what you're doing", bugs happen to all of us and it pays to respect separation practices to minimize the extent of damage they can cause.

Aside from that, it also makes your code non-obvious and non-transparent.

Normally, in bash scripting, you won't need indirect references at all. Generally, people look at this for a solution when they don't understand or know about Bash Arrays or haven't fully considered other Bash features such as functions.

Evaluating indirect/reference variables

BASH allows you to expand a parameter indirectly -- that is, one variable may contain the name of another variable:

•  # Bash
   realvariable=contents
   ref=realvariable
   echo "${!ref}"   # prints the contents of the real variable

KornShell (ksh93) has a completely different, more powerful syntax -- the nameref command (also known as typeset -n):

•  # ksh93
   realvariable=contents
   nameref ref=realvariable
   echo "$ref"      # prints the contents of the real variable

Zsh allows you to access a parameter indirectly with the parameter expansion flag P:

•  # zsh
   realvariable=contents
   ref=realvariable
   echo ${(P)ref}   # prints the contents of the real variable

Unfortunately, for shells other than Bash, ksh93, and zsh there is no syntax for evaluating a referenced variable. You would have to use eval, which means you would have to undergo extreme measures to sanitize your data to avoid catastrophe.

It's difficult to imagine a practical use for this that wouldn't be just as easily performed by using an associative array. But people ask it all the time (it is genuinely a frequently asked question).

ksh93's nameref allows us to work with references to arrays, as well as regular scalar variables. For example,

•  # ksh93
   myfunc() {
     nameref ref=$1
     echo "array $1 has ${#ref[*]} elements"
   }
   realarray=(...)
   myfunc realarray

zsh's ability to nest parameter expansions allow for referencing arrays too:

•  # zsh
   myfunc() {
    local ref=$1
    echo "array $1 has ${#${(@P)ref}} elements"
   }
   realarray=(...)
   myfunc realarray

We are not aware of any trick that can duplicate that functionality in POSIX or Bourne shells (short of using eval, which is extremely difficult to do securely). Bash can almost do it -- some indirect array tricks work, and others do not, and we do not know whether the syntax involved will remain stable in future releases. So, consider this a use at your own risk hack.

•  # Bash -- trick #1.  Seems to work in bash 2 and up.
   realarray=(...) ref=realarray; index=2
   tmp="$ref[$index]"
   echo "${!tmp}"            # gives array element [2]
  
   # Bash -- trick #2.  Seems to work in bash 3 and up.
   # Does NOT work in bash 2.05b.
   tmp="$ref[@]"
   printf "<%s> " "${!tmp}"; echo    # Iterate whole array.

It is not possible to retrieve array indices directly using the Bash ${!var} indirect expansion.

Assigning indirect/reference variables

Sometimes you'd like to "point" from one variable to another, for purposes of writing information to a dynamically configurable place. Typically this happens when you're trying to write a "reusable" function or library, and you want it to put its output in a variable of the caller's choice instead of the function's choice. Various traits of Bash make safe (reusability of Bash functions difficult at best, so this is something that should not happen often.)

Assigning a value "through" a reference (I'm going to use "ref" from now on) is more widely possible, but the means of doing so are usually extremely shell-specific. All shells with the sole exception of AT&T ksh93 lack real reference variables or pointers. Indirection can only be achieved by indirectly evaluating variable names. IOW, you can never have a real unambiguous reference to an object in memory, the best you can do is use the name of a variable to try simulating the effect. Therefore, you must control the value of the ref and ensure side-effects such as globbing, user-input, and conflicting local parameters can't affect parameter names. Names must either be deterministic or validated in a way that makes certain guarantees. If an end user can populate the ref variable with arbitrary strings, the result can be unexpected code injection. We'll show an example of this at the end.

In ksh93, we can use nameref again:

•  # ksh93/mksh/Bash 4.3
   nameref ref=realvariable
   ref=contents
   # realvariable now contains the string "contents"

In Bash, we can use read and Bash's here string syntax:

•  # Bash/ksh93/mksh/zsh
   ref=realvariable
   IFS= read -rd '' "$ref" <<<contents
   # realvariable now contains the string "contents"

If you need to assign multiline values, keep reading.

A similar trick works for Bash array variables too:

•  # Bash/ksh93/mksh/zsh
  
   typeset readFix=${BASH_VERSION+a}
   aref=realarray
   IFS=' ' read -d '' -r${readFix:-A} "$aref" <<<'words go into array elements'
   echo "${realarray[1]}"   # prints "go"

IFS is used to delimit words, so you may or may not need to set that.

Another trick is to use Bash's printf -v (only available in recent versions):

•  # Bash 3.1 or higher ONLY. Array assignments require 4.2 or higher.
   ref=realvariable
   printf -v "$ref" %s "contents"

You can use all of printf's formatting capabilities. This trick also permits any string content, including embedded and trailing newlines.

Yet another trick is Korn shell's typeset or Bash's declare. The details of typeset vary greatly between shells, but can be used in compatible ways in limited situations. Both of them cause a variable to become locally scoped to a function, if used inside a function; but if used outside all functions, they can operate on global variables.

•  # Bash/ksh (any)/zsh
   typeset "${ref}=contents"
  
   # Bash
   declare "${ref}=contents"

Bash 4.2 adds declare -g which assigns variables to the global scope from any context.

There is very little advantage to typeset or declare over eval for scalar assignments, but many drawbacks. typeset cannot be made to not affect the scope of the assigned variable. This trick does preserve the exact contents, like eval, if correctly escaped.

You must still be careful about what is on the left-hand side of the assignment. Inside square brackets, expansions are still performed; thus, with a tainted ref, declare can be just as dangerous as eval:

•  # Bash:
   ref='x[$(touch evilfile; echo 0)]'
   ls -l evilfile   # No such file or directory
   declare "${ref}=value"
   ls -l evilfile   # It exists now!

This problem also exists with typeset in mksh and pdksh, but apparently not ksh93. This is why the value of ref must be under your control at all times.

If you aren't using Bash or Korn shell, you can do assignments to referenced variables using HereDocument syntax:

•  # Bourne
   ref=realvariable
   read -r "$ref" <<EOF
   contents
   EOF

(Alas, read without -d means we're back to only getting at most one line of content. This is the most portable trick, but it's limited to single-line content.)

Remember that when using a here document, if the sentinel word (EOF in our example) is unquoted, then parameter expansions will be performed inside the body. If the sentinel is quoted, then parameter expansions are not performed. Use whichever is more convenient for your task.

eval

•  # Bourne
   ref=myVar
   eval "${ref}=\$value"

This expands to the statement that is executed:

•  myVar=$value

The right-hand side is not parsed by the shell, so there is no danger of unwanted side effects. The drawback, here, is that every single shell metacharacter on the right hand side of the = must be quoted/escaped carefully. In the example shown here, there was only one. In a more complex situation, there could be dozens.

This is very often done incorrectly. Permutations like these are seen frequently all over the web even from experienced users that ought to know better:

eval ${ref}=\"$value\" # WRONG!
eval "$ref='$value'"   # WRONG!
eval "${ref}=\$value"  # Correct (curly braced PE used for clarity)
eval "$ref"'=$value'   # Correct (equivalent)

The good news is that if you can sanitize the right hand side correctly, this trick is fully portable, has no variable scope issues, and allows all content including newlines. The bad news is that if you fail to sanitize the right hand side correctly, you have a massive security hole. Use eval if you know what you're doing and are very careful.

The following code demonstrates how to correctly pass a scalar variable name into a function by reference for the purpose of "returning" a value:

# POSIX

f() {
    # Code goes here that eventually sets the variable "x"
    ${1:+:} return 1
    eval "${1}=\$x"
}

The following code is one way to pass the name of a ksh-compatible 1-dimensional indexed array into a function by reference. There are many ways to balance portability versus functionality depending on your needs. This is mainly for authors of library code that are comfortable working around the subtleties of arrays and functions in each shell. The required version detection code is omitted. More complex solutions are needed if you require robustly dealing with local variable namespace collisions in dynamically-scoped shells including Bash.

# bash/ksh93/mksh/zsh

${ZSH_VERSION+false} || emulate ksh
${BASH_VERSION+shopt -s extglob lastpipe} 2>/dev/null

function f {
    ${1:+:} return 1
    ${is_ksh93+eval typeset -n "${1}=\$1"}
    typeset -a ref

    # code that generates "ref" goes here. We assume you're returning a non-sparse array.

   eval "$1"'=("${ref[@]}")'
}

function main {
    # The caller MUST always declare the variable.
    typeset -a arr
    f arr args...
}

main "$@"

• note: Almost always, you should use "function" and "typeset" in portable non-POSIX code. Most of this wiki features Bash-only or POSIX-only examples and intentionally avoids these. See the mksh manual for function f vs f() differences.

• note2: Don't shift away your reference arg. Even though in ksh93, you can, you can't do that using this method, even if you use Bash-4.3 or mksh namerefs instead of or in addition to eval.

• note3: Similarly, eval typeset -n "$1=\$1" is a ksh93-specific hack to work around dynamic scope breakage. This WILL break bash/mksh namerefs, so the is_ksh93 in this example must be able to separate AT&T ksh93 from other kshes. (details).

The following is inefficient, ugly, easy to do incorrectly, and usually unnecessary. This simply documents the single-quote escaping method. It may be useful in cases where there are large numbers of metacharacters that must be put into a string literal and eval'd. You're almost always better off constructing the string in advance using e.g. a heredoc with an escaped sentinel and then just expanding a single variable on the RHS of the assignment as demonstrated in the above example.

# POSIX

evil="';"
value='echo fail'
ref=x
{ eval "${ref}='$(sed -e "s/'/'\\\''/g")'"; } <<EOF
${evil}${value}
EOF

[ "${evil}${value}" = "$x" ] && echo success

# Bash/ksh93/zsh
eval "$(printf %s=%q "$ref" "$value")"

See Also

• More advanced indirection on arrays

• Bash vs Mksh vs ksh93 namerefs

• BashFAQ/005

• BashGuide/Arrays

• BashSheet Array reference

CategoryShell