Differences between revisions 49 and 65 (spanning 16 versions)
Revision 49 as of 2008-12-09 03:26:24
Size: 379
Editor: cpc1-leed11-0-0-cust614
Comment: 3.33333333333333
Revision 65 as of 2009-11-16 19:39:04
Size: 3341
Editor: GreyCat
Comment: move the footnote back to the bottom
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
Hi there Keep up the outstanding work and thank you... kitchen Its very well ! http://bpach.wikidot.com/system:page-tags/tag/salad salad plain, http://silversh.wikidot.com/system:page-tags/tag/soup soup character, http://bpach.wikidot.com/system:page-tags/tag/cream pasta system, http://silvershse.wikidot.com/system:page-tags/tag/jam vodka, I just don't have anything to say. <<Anchor(faq22)>>
== How can I calculate with floating point numbers instead of just integers? ==
[[BASH]] does not have built-in floating point [[ArithmeticExpression|arithmetic]]:

{{{
    $ echo $((10/3))
    3
}}}

Bash cannot do ''anything'' with floating point numbers, ''including'' compare them to each other(*). Instead, an external program must be used, e.g. {{{bc}}}, {{{awk}}} or {{{dc}}}:

{{{
    $ echo "scale=3; 10/3" | bc
    3.333
}}}

The "scale=3" command notifies {{{bc}}} that three digits of precision after the decimal point are required.

Same example with {{{dc}}} (reversed polish calculator, lighter than bc):
{{{
    $ echo "3 k 10 3 / p" | dc
}}}

{{{k}}} sets the precision to 3, and {{{p}}} prints the value of the top of the stack with a newline. The stack is not altered, though.

If you are trying to compare floating point numbers, be aware that a simple ''x < y'' is not supported by all versions of {{{bc}}}.

{{{
    # This would work with some versions, but not HP-UX 10.20.
    # The here string feature, inherited from rc->zsh->ksh93 was
    # introduced in bash 2.05b-alpha1
    imadev:~$ bc <<< '1 < 2'
    syntax error on line 1,
}}}

Alternatively, you could use this:

{{{
    # Bash
    if [[ $(bc <<< "1.4 - 2.5") = -* ]]; then
        echo "1.4 is less than 2.5."
    fi
}}}

This example subtracts 2.5 from 1.4, and checks the sign of the result. If it is negative, the first number is less than the second.

Portable version:

{{{
    # Bourne
    case "`echo "1.4 - 2.5" | bc`" in
      -*) echo "1.4 is less than 2.5";;
    esac
}}}

[[AWK]] can be used for calculations, too:

{{{
    $ awk 'BEGIN {printf "%.3f\n", 10 / 3}'
    3.333
}}}

There is a subtle but important difference between the {{{bc}}} and the {{{awk}}} solution here: {{{bc}}} reads commands and expressions from ''standard input''. {{{awk}}} on the other hand evaluates the expression as ''part of the program''. Expressions on standard input are ''not'' evaluated, i.e. {{{echo 10/3 | awk '{print $0}'}}} will print {{{10/3}}} instead of the evaluated result of the expression.

Newer versions of zsh and the KornShell have built-in floating point arithmetic, together with mathematical functions like {{{sin()}}} or {{{cos()}}} .

Caveat: Many problems that look like floating point arithmetic can in fact be solved using integers only, and thus do not require these tools: Problems dealing with rational numbers. For example, to check if two numbers {{{x}}} and {{{y}}} are in a ratio of 4:3 or 16:9 you may use something along these lines:
{{{
# Variables x and y are integers
if (( $x*9-$y*16==0 )) ; then
   echo "16:9."
elif (( $x*3-$y*4==0 )) ; then
   echo "4:3."
else
   echo "Neither 16:9 nor 4:3."
fi
}}}
A more elaborate test could tell if the ratio is closest to 4:3 or 16:9 without using floating point arithmetic. Note that this very simple example that apparently involves floating point numbers and division is solved with integers and no division. If possible, it's usually more efficient to convert your problem to integer arithmetic than to use floating point arithmetic.

(*)Actually, I lied. It can print them, using {{{printf}}} and one of the {{{%e}}} or {{{%f}}} or {{{%g}}} format strings. But that's all.

How can I calculate with floating point numbers instead of just integers?

BASH does not have built-in floating point arithmetic:

    $ echo $((10/3))
    3

Bash cannot do anything with floating point numbers, including compare them to each other(*). Instead, an external program must be used, e.g. bc, awk or dc:

    $ echo "scale=3; 10/3" | bc
    3.333

The "scale=3" command notifies bc that three digits of precision after the decimal point are required.

Same example with dc (reversed polish calculator, lighter than bc):

    $ echo "3 k 10 3 / p" | dc

k sets the precision to 3, and p prints the value of the top of the stack with a newline. The stack is not altered, though.

If you are trying to compare floating point numbers, be aware that a simple x < y is not supported by all versions of bc.

    # This would work with some versions, but not HP-UX 10.20.
    # The here string feature, inherited from rc->zsh->ksh93 was
    # introduced in bash 2.05b-alpha1
    imadev:~$ bc <<< '1 < 2'
    syntax error on line 1,

Alternatively, you could use this:

    # Bash
    if [[ $(bc <<< "1.4 - 2.5") = -* ]]; then
        echo "1.4 is less than 2.5."
    fi

This example subtracts 2.5 from 1.4, and checks the sign of the result. If it is negative, the first number is less than the second.

Portable version:

    # Bourne
    case "`echo "1.4 - 2.5" | bc`" in
      -*) echo "1.4 is less than 2.5";;
    esac

AWK can be used for calculations, too:

    $ awk 'BEGIN {printf "%.3f\n", 10 / 3}'
    3.333

There is a subtle but important difference between the bc and the awk solution here: bc reads commands and expressions from standard input. awk on the other hand evaluates the expression as part of the program. Expressions on standard input are not evaluated, i.e. echo 10/3 | awk '{print $0}' will print 10/3 instead of the evaluated result of the expression.

Newer versions of zsh and the KornShell have built-in floating point arithmetic, together with mathematical functions like sin() or cos() .

Caveat: Many problems that look like floating point arithmetic can in fact be solved using integers only, and thus do not require these tools: Problems dealing with rational numbers. For example, to check if two numbers x and y are in a ratio of 4:3 or 16:9 you may use something along these lines:

# Variables x and y are integers
if (( $x*9-$y*16==0 )) ; then
   echo "16:9."
elif (( $x*3-$y*4==0 )) ; then
   echo "4:3."
else
   echo "Neither 16:9 nor 4:3."
fi

A more elaborate test could tell if the ratio is closest to 4:3 or 16:9 without using floating point arithmetic. Note that this very simple example that apparently involves floating point numbers and division is solved with integers and no division. If possible, it's usually more efficient to convert your problem to integer arithmetic than to use floating point arithmetic.

(*)Actually, I lied. It can print them, using printf and one of the %e or %f or %g format strings. But that's all.

BashFAQ/022 (last edited 2021-09-01 06:31:58 by geirha)