Differences between revisions 22 and 23
Revision 22 as of 2008-11-22 20:55:50
Size: 6294
Editor: GreyCat
Comment: a bit more explicit up front. also, adhere to my new made-up standard in preparation for possible main-page change.
Revision 23 as of 2009-02-13 19:17:14
Size: 6532
Editor: NeilMoore
Comment: noeol files: check whether $line was non-empty
Deletions are marked like this. Additions are marked like this.
Line 138: Line 138:
On the other hand, if the file lacks a trailing newline (such as {{{/proc/$$/cmdline}}} on Linux), the line will not be printed by a {{{while read ...}}} loop, as {{{read}}} returns a failure that aborts the while loop, thus failing to print the ultimate line: On the other hand, if the file lacks a trailing newline (such as {{{/proc/$$/cmdline}}} on Linux), the line will not be printed by a {{{while read ...}}} loop, as {{{read}}} returns a failure that aborts the while loop, thus failing to print the ultimate line. It does, however, store the contents of the partial line in the variable, so you can test whether there was such an unterminated line by checking whether the variable is non-empty at the end of the loop:
Line 145: Line 145:
    echo -en 'line 1\ntruncated line 2' | while read line; do echo "$line"; done; echo "$line"     echo -en 'line 1\ntruncated line 2' | while read line; do echo "$line"; done; [[ $line ]] && echo -n "$line"
Line 148: Line 148:
    echo -en 'line 1\ntruncated line 2' | (while read line; do echo "$line"; done; echo "$line")     echo -en 'line 1\ntruncated line 2' | (while read line; do echo "$line"; done; [[ $line ]] && echo "$line")

How can I read a file (data stream, variable) line-by-line?

Use a while loop and the read command:

    while read line
    do
        echo "$line"
    done < "$file"

BASH can also iterate over the lines in a variable using a "here string":

    while read line; do
        echo "$line"
    done <<< "$var"

If your data source is the script's standard input, then you don't need any redirection at all.

If you want to operate on individual fields within each line, you may supply additional variables to read:

    # Input file has 3 columns separated by white space.
    while read first_name last_name phone; do
      ...
    done < "$file"

If the field delimiters are not whitespace, you can set IFS (input field separator):

    while IFS=: read user pass uid gid gecos home shell; do
      ...
    done < /etc/passwd

Also, please note that you do not necessarily need to know how many fields each line of input contains. If you supply more variables than there are fields, the extra variables will be empty. If you supply fewer, the last variable gets "all the rest" of the fields after the preceding ones are satisfied. For example,

    while read first_name last_name junk; do
      ...
    done <<< 'Bob Smith 123 Main Street Elk Grove Iowa 123-555-6789'
    # Inside the loop, first_name will contain "Bob", and
    # last_name will contain "Smith".  The variable "junk" holds
    # everything else.

The read command modifies each line read, e.g. by default it removes all leading whitespace characters (blanks, tab characters, ... -- basically any leading characters present in IFS). If that is not desired, the IFS variable has to be cleared:

    while IFS= read line
    do
        echo "$line"
    done < "$file"

As a feature, the read command concatenates lines that end with a backslash '\' character to one single line. To disable this feature, KornShell and BASH, as well as the POSIX standard for the Bourne shell, have read -r:

    while IFS= read -r line
    do
        echo "$line"
    done < "$file"

Note that reading a file line by line this way is very slow for large files. Consider using e.g. AWK instead if you get performance problems.

One may also read from a command instead of a regular file:

    some command | while read line; do
       other commands
    done

This method is especially useful for processing the output of find with a block of commands:

    find . -print0 | while read -d $'\0' file; do
        mv "$file" "${file// /_}"
    done

This command reads one filename at a time from the file command and renames the file so that its spaces are replaced by underscores.

Note the usage of -print0 in the find command, which uses NUL bytes as filename delimiters, and -d $'\0' in the read command to instruct it to read all text into the file variable until it finds a NUL byte. By default, find and read delimit their input with newlines; however, since filenames can potentially contain newlines themselves, this default behaviour will split up those filenames with newlines and cause the loop body to fail. See FAQ #20 for more details.

Using a pipe to send find's output into a while loop places the loop in a SubShell and may therefore cause problems later on if the commands inside the body of the loop attempt to set variables which need to be used outside the loop; in that case, see FAQ 24, or use ProcessSubstitution like:

    while read line; do
        other commands
    done < <(some command)

Sometimes it's useful to read a file into an array, one array element per line. You can do that with the following example:

    O=$IFS IFS=$'\n' arr=($(< myfile)) IFS=$O
    # Warning: breaks if lines contain "*" or similar

This temporarily changes the Input Field Separator to a newline, so that each line will be considered one field by read. Then it populates the array arr with the fields. Then it sets the IFS back to what it was before.

This same trick works on a stream of data as well as a file:

    O=$IFS IFS=$'\n' arr=($(find . -type f)) IFS=$O
    # Same warning as the previous example

Of course, this will blow up in your face if the filenames contain newlines; see FAQ 20 for hints on dealing with such filenames.

Both of these array-stuffing examples fail if the shell encounters a glob that matches files in the current directory as one of the input lines. Glob expansion can be disabled with set -f and then re-enabled afterward with set +f if needed. For more details on arrays, see FAQ 5. Moreover, since bash will treat sequences of IFS whitespace as a single character, if the input has empty lines (meaning that groups of two or more consecutive \n characters appear in the file), they will be lost. So, for example:

    $ cat myfile
    line1
    
    line2
    line3
    $ O=$IFS IFS=$'\n' arr=($(< myfile)) IFS=$O
    $ declare -p arr
    declare -a arr='([0]="line1" [1]="line2" [2]="line3")'

In the end, the safest way to read a file into an array is still to use a loop:

    i=0
    while IFS= read -r arr[i++]; do :;done < "$file"
    # or  <<< "$var"  to iterate over a variable 

On the other hand, if the file lacks a trailing newline (such as /proc/$$/cmdline on Linux), the line will not be printed by a while read ... loop, as read returns a failure that aborts the while loop, thus failing to print the ultimate line. It does, however, store the contents of the partial line in the variable, so you can test whether there was such an unterminated line by checking whether the variable is non-empty at the end of the loop:

    # This does not work:
    echo -en 'line 1\ntruncated line 2' | while read line; do echo $line; done

    # This does not work either:
    echo -en 'line 1\ntruncated line 2' | while read line; do echo "$line"; done; [[ $line ]] && echo -n "$line"

    # This works:
    echo -en 'line 1\ntruncated line 2' | (while read line; do echo "$line"; done; [[ $line ]] && echo "$line")

For a discussion of why the second example above does not work as expected, see FAQ #24.

BashFAQ/001 (last edited 2023-06-28 01:53:29 by larryv)